Free estimator · 2026 rates · No sign-up

5×10 bathroom remodel cost calculator

2026 planning model · Documentation updated October 9, 2026

Priced for a 5×10 (50 sq ft) full bath: pick the finish level, shower choice, and region — instant range, no email required.

A 5×10 (50 sq ft) bathroom remodel costs $14,450–$20,060 as a full midrange remodel at BathCalc’s 2026 model rates — $10,840–$15,050 as a cosmetic refresh, and $19,130–$26,550 gutted to the studs. The shower choice and any plumbing moves move the total most.

RefreshFull remodelGut & redesign
$10,840–$15,050$14,450–$20,060$19,130–$26,550

Your 5×10 remodel size locked at 50 sq ft

Finish level what gets replaced
Shower / tub choice the biggest single switch

Rates are 2026 U.S. planning estimates including demolition, rough plumbing and electrical, tile, fixtures, and permits for full scopes. Remodeling a different size? Use the full-size calculator.

Estimate · BathCalc · FX-01
$14,450 – $20,060
Midpoint $17,000 · $340 / sq ft
Where the money goes
Labor$7,650
Tile & flooring$3,400
Fixtures & vanity$3,740
Plumbing & electrical$1,360
Paint & drywall$850

Range shows the model’s planning allowance for this scope. Hold a 10% contingency for what's behind the tile.

Costs

What a 5×10 remodel costs, line by line

National-average rates at 50 sq ft — the same model the calculator runs, before your region and shower adjustments.

ScopeTub comboPrefab walk-inTiled walk-in
Refresh$10,840 – $15,050$11,520 – $15,990$14,660 – $20,360
Full remodel$14,450 – $20,060$15,130 – $21,000$18,280 – $25,370
Gut & redesign$19,130 – $26,550$19,810 – $27,490$22,950 – $31,860

Ranges include demolition, rough plumbing and electrical, tile, fixtures, and permits for full scopes in the contiguous U.S. See methodology.

What fits in a 5×10 bathroom

  • Full bath, comfortable. 50 sq ft is larger than the standard 5×8 — the extra strip usually becomes a bigger vanity (48–60"), a separate linen closet, or both.
  • Tub along the 5' wall. A 60-inch tub fits the short wall with the toilet and vanity stacked along the 10' run — the classic layout, cheapest because nothing moves.
  • Walk-in shower swap. A 36–48" walk-in replaces the tub; the tiled version adds about $4,500 over the tub-combo baseline.
  • Split fixtures. Room enough for a separate tub and 36" shower, but the toilet usually relocates — budget the $2,500 move.

Typical timeline (contractor crew)

PhaseDuration
Demo & removal1–2 days
Rough plumbing & electrical2–4 days
Waterproofing & tile3–5 days
Fixtures & vanity set1–2 days
Paint, glass & accessories1–2 days
Bathroom usable again~2–3 weeks
FAQ

5×10 bathroom remodel questions

How much does a 5×10 bathroom remodel cost?

$10,840–$15,050 as a cosmetic refresh, $14,450–$20,060 as a full midrange remodel, and $19,130–$26,550 gutted and redesigned at BathCalc’s 2026 model rates — all with the layout unchanged.

Is a 5×10 bathroom considered small?

No. It's a comfortable full bath — 25% larger than the standard 5×8 (40 sq ft). The extra strip typically fits a 48–60 inch vanity or added storage.

How much per square foot is a 5×10 remodel?

Roughly $290–$400 per square foot at the midrange tier. Fixtures and trades cost the same in any room, so per-square-foot rates stay elevated even in a mid-size bath.

Should a 5×10 bathroom have a tub or shower?

Both fit. A 60-inch tub uses the short wall; a 36–48 inch walk-in shower frees floor for a full-width vanity. A tiled walk-in adds about $4,500 over the tub-combo baseline.

How long does a 5×10 bathroom remodel take?

Plan on 2–3 weeks with a contractor crew, demo through paint. Order-dependent pauses (vanities and tile on backorder) stretch the job more than the trades do.

Can I remodel a 5×10 bathroom for $10,000?

Only as a cosmetic refresh with the layout untouched and some DIY: reglaze the tub, paint the tile, swap the vanity, toilet, lighting, and flooring. Any plumbing change pushes past $12,000.

Data

How we price these estimates

This is the same remodel model as the main calculator with area fixed at 50 sq ft: cosmetic $255/sq ft; midrange $2,000 + $300/sq ft; upscale $4,500 + $360/sq ft. Add $800 for a prefab shower or $4,500 for tiled, and $2,500 for a fixture move, before the regional adjustment.

These are BathCalc model assumptions, not a survey of contractor bids. The range is 85%–118% of the midpoint, rounded to the nearest $10; it is a planning allowance, not a statistical confidence interval. Regional factors are baseline 1.00, Northeast 1.18, West 1.12, South 0.92 and Midwest 0.90; they do not replace ZIP-code quotes.

Scope reference: Homewyse installation cost calculators. Reference scopes and dates can differ from this model; the linked page does not independently validate every BathCalc rate. Compare demolition, disposal, waterproofing, tax, permits and structural repairs explicitly when requesting itemized quotes. Model documentation updated . Report a pricing or scope correction.

More tools

BathCalc calculators

Bathroom remodel cost calculatorAny room size, finish & shower choice
Walk-in shower costPrefab vs. tiled standalone shower pricing
Bathtub installation costAlcove, rebuild & specialty tub installs